Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

English
Japanese

Translating step 1

Step 1
Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
  • Remove the following five Phillips screws holding the lower support bracket in place:

  • Four 3.2 mm screws

  • One 1.7 mm screw

  • On at least some EMC 2544 machines, all five screws are the same size.

  • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

下部サポートブラケットを固定している次の5本のネジを外します。

3.2 mmネジー4本

1.7 mmネジー1本

あるEMC 2544モデルでは、上の5本のネジサイズが全て同じものがあります。

ネジにアクセスするために、iMac底側の端に沿って付けられたディスプレイ用接着剤を剥がさなければなりません。

Your contributions are licensed under the open source Creative Commons license.