Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

English
French

Translating step 1

Step 1
Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
  • Remove the following five Phillips screws holding the lower support bracket in place:

  • Four 3.2 mm screws

  • One 1.7 mm screw

  • On at least some EMC 2544 machines, all five screws are the same size.

  • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Retirez les cinq vis cruciformes suivantes, qui maintiennent le support inférieur en place :

Quatre vis de 3,2 mm

Une vis de 1,7 mm

Vous devrez peut-être décoller l'adhésif de l'écran sur le bord inférieur du boîtier de l'iMac pour accéder aux vis.

[* black] Remove the following five Phillips screws holding the lower support bracket in place:
[* red] Four 3.2 mm screws
[* orange] One 1.7 mm screw
[* icon_note] On at least some EMC 2544 machines, all five screws are the same size.
[* icon_note] You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Your contributions are licensed under the open source Creative Commons license.