Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 39 guides that include this step.

English
German

Translating step 1

Step 1
Remove the following five Phillips  screws holding the lower support bracket in place: Four 3.2 mm screws
  • Remove the following five Phillips screws holding the lower support bracket in place:

  • Four 3.2 mm screws

  • One 1.7 mm screw

  • On at least some EMC 2544 machines, all five screws are the same size.

  • You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Entferne folgende fünf Kreuzschlitzschrauben, welche die untere Displayhalterung befestigen:

Vier 3,2 mm Schrauben

Eine 1,7 mm Schraube

Es gibt aber auch EMC2544-Geräte, bei denen alle fünf Schrauben gleich sind.

Du musst eventuell die Verklebung am unteren Rand der Gehäuseöffnung ablösen, um an alle Schrauben zu gelangen.

Your contributions are licensed under the open source Creative Commons license.