Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Japanese

Translating step 3

Step 3
Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.
  • Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.

  • Instructions on how to properly heat and use the iOpener can be found here.

Openerを使ってディスプレイアセンブリの上部端に載せて、温度センサを固定しているテープの接着剤を温めて柔らかくします。

Opener を使って、正しく温めるためにこちらのガイドを参照してください。

Your contributions are licensed under the open source Creative Commons license.