Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
French

Translating step 3

Step 3
Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.
  • Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.

  • Instructions on how to properly heat and use the iOpener can be found here.

Posez un iOpener sur le bord supérieur de l'ensemble écran pour chauffer et ramollir la colle du ruban adhésif qui fixe le capteur thermique en place.

Vous trouverez les informations pour chauffer et utiliser correctement l'iOpener ici.

Your contributions are licensed under the open source Creative Commons license.