Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
German

Translating step 3

Step 3
Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.
  • Use an iOpener near the top edge of the display assembly to heat and soften the adhesive on the piece of tape holding the thermal sensor in place.

  • Instructions on how to properly heat and use the iOpener can be found here.

Lege einen iOpener nahe der Oberkante der Displayeinheit auf und weiche so den Kleber am St├╝ckchen Klebeband auf, welches den Thermosensor befestigt.

Eine Anleitung wie man den iOpener richtig anwendet, findest du hier.

Your contributions are licensed under the open source Creative Commons license.