Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Japanese

Translating step 3

Step 3
While holding the glass up with the suction cup, insert the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.
  • While holding the glass up with the suction cup, insert the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

吸盤でガラスを引き上げながら、ピックの先端をガラスとiPad本体の隙間に差し込みます。

開口ピックをディスプレイの側面に2mm以上深く挿入しないでください。深くピックを挿入してしまうと、バックライトアセンブリ、LCDディスプレイ、タッチスクリーンを損傷する可能性があります。

[* black] While holding the glass up with the suction cup, slideinsert the point of an opening pick into the gap between the glass and body of the iPad.
[* black] While holding the glass up with the suction cup, slideinsert the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

Your contributions are licensed under the open source Creative Commons license.