Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 25 guides that include this step.

English
Italian

Translating step 3

Step 3
While holding the glass up with the suction cup, insert the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.
  • While holding the glass up with the suction cup, insert the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

Mentre tieni sollevato il vetro con la ventosa, infila la punta di un plettro nella fessura tra il vetro e il corpo dell'iPad.

Non infilare il plettro più di 2 mm sotto il lato del vetro. Infilarlo più a fondo potrebbe danneggiare il gruppo della retroilluminazione, il pannello LCD o il touch screen.

[* black] While holding the glass up with the suction cup, slideinsert the point of an opening pick into the gap between the glass and body of the iPad.
[* black] While holding the glass up with the suction cup, slideinsert the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

Your contributions are licensed under the open source Creative Commons license.