Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Chinese

Translating step 2

Step 2
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

沿加热位置, 将吸盘放在其正中间的位置。

确保吸盘已经完全贴合在屏幕没有空洞和气泡。

一只手将 iPad 固定在桌面上, 另一只手轻轻将吸盘提起来, 让屏幕和外壳留一条小缝。

只需要分离一条小缝,能够让插入一个小撬片就够了,过分用力会破坏你的屏幕。

Your contributions are licensed under the open source Creative Commons license.