Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Japanese

Translating step 2

Step 2
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

温めた側の中央部分より少し上辺りに、吸盤カップを取り付けます。

吸盤がしっかりとスクリーンに装着されるように、スクリーン上に完全に平らに付いているかを確認してください。

iPadを片手で押さえながら、吸盤カップを上部に向けて引っ張りあげます。

ピックを差し込むための充分なスペースを作るため、ガラスを引っ張り上げます。あまり持ち上げ過ぎるとガラスが割れる恐れがあります。

Your contributions are licensed under the open source Creative Commons license.