Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
Italian

Translating step 2

Step 2
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

Posiziona con attenzione una ventosa al centro del bordo sinistro.

Assicurati che la ventosa sia completamente piatta sul vetro per avere una presa salda.

Mentre tieni fermo l'iPad con una mano, tira la ventosa per separare leggermente il gruppo dello schermo dalla copertura posteriore.

Sta' attento a sollevare il vetro solo il sufficiente per infilarci un plettro. Se lo sollevi di più rischi di rompere il vetro.

Your contributions are licensed under the open source Creative Commons license.