Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
French

Translating step 2

Step 2
Carefully place a suction cup halfway up the heated side. Be sure the cup is completely flat on the screen to get a tight seal. While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.
  • Carefully place a suction cup halfway up the heated side.

  • Be sure the cup is completely flat on the screen to get a tight seal.

  • While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel assembly from from the rear case.

  • Be careful to only lift the glass enough to insert an opening pick—any more and you risk cracking the glass.

Placez soigneusement une ventouse à mi-hauteur du côté chauffé.

Assurez-vous que la ventouse est complètement plate sur l'écran pour obtenir une bonne adhérence.

Tout en maintenant l'iPad enfoncé d'une main, tirez sur la ventouse pour séparer légèrement l'ensemble panneau frontal et la coque arrière.

Faites attention à soulever la vitre juste assez pour insérer un médiator – un peu plus et vous risquez de fissurer le verre.

Your contributions are licensed under the open source Creative Commons license.