Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Italian

Translating step 1

Step 1
Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.
  • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

  • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

Solleva l'hard drive dal bordo più vicino alla scheda logica e tiralo leggermente fuori dal suo alloggiamento.

L'unità è ancora collegato tramite il cavo SATA; non provare a rimuoverla del tutto già a questo punto.

Your contributions are licensed under the open source Creative Commons license.