Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.


Translating step 1

Step 1
Remove the hard drive cable.
  • Remove the hard drive cable.

  • There may be a sticker connecting this cable to the hard drive. If so, remove the sticker before attempting to remove the cable!

  • Remove the two 6.2 mm T8 Torx screws from the side of the hard drive.

Remueve el cable del disco duro.

Puede que haya un sticker conectando este cable al disco duro. Si es así, ¡quita el sticker antes de intentar remover el cable!

Remueve los dos tornillos Torx T8 de 6.2 mm del costado del disco duro.

Your contributions are licensed under the open source Creative Commons license.