Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.


Translating step 3

Step 3
Remove the following three screws:
  • Remove the following three screws:

  • One 5.0 mm T8 Torx or 2.0 mm Hex screw (either screwdriver will work)

  • One 16.2 mm T6 Torx screw

  • One 26 mm T6 Torx standoff

Retira los siguientes tres tornillos:

Un tornillo Torx T8 de 5.0 mm o tornillo hexagonal de 2.0 mm (cualquiera de los dos destornilladores funcionar√°)

Un tornillo Torx T6 de 16.2 mm

Un separador Torx T6 de 26 mm.

Your contributions are licensed under the open source Creative Commons license.