Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 10 guides that include this step.

English
Dutch

Translating step 1

Step 1
The SATA data connector has a clip that must be pressed to allow removal. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board. While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.
  • The SATA data connector has a clip that must be pressed to allow removal.

  • While pressing on the clip with your thumb, lift and disconnect the SATA data connector from its socket on the logic board.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.