Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 11

Step 11
Remove the four 7.3 mm T8 Torx screws securing the logic board to the rear enclosure.
  • Remove the four 7.3 mm T8 Torx screws securing the logic board to the rear enclosure.

Entferne die vier 7,3 mm Torx T8 Schrauben, welche das Logic Board am Rückgehäuse befestigen.

Your contributions are licensed under the open source Creative Commons license.