Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
German

Translating step 8

Step 8
Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board. Push the cable slightly to the right. Push the cable slightly to the right.
  • Use the flat edge of a spudger to pry the headphone jack cable connector from its socket on the logic board.

  • Push the cable slightly to the right.

Hebele den Verbinder des Kabels zur Kopfhörerbuchse mit dem flachen Ende des Spudgers aus seinem Anschluss auf dem Logic Board.

Schiebe das Kabel etwas nach rechts.

Your contributions are licensed under the open source Creative Commons license.