Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 19 guides that include this step.

English
German

Translating step 2

Step 2
Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.
  • Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.

  • The uppermost screw has a rubber standoff adhered to its head to support the display—leave this in place.

Entferne die drei 10 mm Torx T10 Schrauben, welche den Lüfter am Rückgehäuse befestigen.

Die oberste Schraube ist mit einem Abstandshalter aus Gummi auf ihrem Kopf versehen, um das Display zu stützen. Lasse ihn, wo er ist.

Your contributions are licensed under the open source Creative Commons license.