Skip to main content

Reemplazo del disco duro Mac Mini de mediados de 2011

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

Translating step 5

English
Spanish
Step 5
Mac Mini Mid 2011 Hard Drive Replacement: step 0, image 1 of 1
  • Simultaneously push the two plastic clips on the far left and right sides of the I/O board toward the middle of the I/O board and pull the I/O board away from the outer case.

  • Only pull the logic board assembly out of the outer case until the edge of the I/O board is about .5" away from the edge of the aluminum outer case.

Al mismo tiempo, empuja los dos clips de plástico en el extremo izquierdo y derecho de la placa de E/S hacia el centro de la placa de E/S y retire la placa de E/S de la caja exterior.

Tira del conjunto de la placa lógica fuera de la caja externa hasta que el borde de la tarjeta de E/S esté a aproximadamente .5 "del borde de la caja exterior de aluminio.

Your contributions are licensed under the open source Creative Commons license.