Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 33 guides that include this step.

English
German

Translating step 3

Step 3
Lift the fan out of the mini for enough clearance to access its connector. Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board. Do not pry at the socket, or you may rip it from the logic board.
  • Lift the fan out of the mini for enough clearance to access its connector.

  • Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board.

  • Do not pry at the socket, or you may rip it from the logic board.

  • Remove the fan.

Nimm den Lüfter aus dem Mini heraus, sodass du ohne Probleme an die Anschlüsse kommst.

Ziehe die Lüfterkabel vorsichtig nach oben, um den Stecker aus seiner Halterung auf der Platine zu lösen.

Entferne den Lüfter

[* black] Lift the fan out of the mini for enough clearance to access its connector.
[* black] CarefullyGrab all the wires at once and gently pull the fan cables upwardstraight up to liftdisconnect the fan connector up out of its socket onfrom the logic board.
[* icon_caution] Do '''not''' pry at the socket, or you may rip it from
the logic board.
[* black] CarefullyGrab all the wires at once and gently pull the fan cables upwardstraight up to liftdisconnect the fan connector up out of its socket onfrom the logic board.
[* icon_caution] Do '''not''' pry at the socket, or you may rip it from
the logic board.
[* black] Remove the fan.

Your contributions are licensed under the open source Creative Commons license.