Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 1

Step 1
Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Use the tip of a spudger or your fingernail to flip up the retaining flap on the trackpad ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Pull the trackpad ribbon cable straight out of its socket toward the front edge of the Air.

Klappe den Halteclip auf dem ZIF Sockel des Tastfeld-Flachbandkabels mit der Spudgerspitze oder einem Fingernagel nach oben.

Achte darauf, an dem klappbaren Halteclip zu hebeln und nicht direkt am Sockel.

Ziehe das Tastfeld-Flachbandkabel gerade aus seinem Sockel heraus in Richtung der vorderen Kante des Geräts.

Your contributions are licensed under the open source Creative Commons license.