Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 73 guides that include this step.

English
Chinese

Translating step 1

Step 1
Shut down and close your computer. Lay it on a soft surface top-side down.
  • Shut down and close your computer. Lay it on a soft surface top-side down.

  • Remove the following ten screws:

  • Two 8 mm 5-point Pentalobe screws

  • Eight 2.5 mm 5-point Pentalobe screws

  • The special screwdriver needed to remove the 5-point Pentalobe screws can be found here.

电脑关机,并将其合上。 将电脑倒置并放置在柔软的表面上。

移除下列十颗螺丝:

2颗 8mm 5点防撬螺丝。

8颗 2.5mm 5点防撬螺丝。

这里需要使用特制的螺丝刀来移除5点防撬螺丝-可以在这里找到特制螺丝刀

Your contributions are licensed under the open source Creative Commons license.