Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 23 guides that include this step.

English
German

Translating step 11

Step 11
In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board. Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.
  • In the next four steps, take care to pry up only on the cable connectors, and not on their sockets on the logic board.

  • Use a spudger or a fingernail to disconnect the front-facing camera and sensor cable connector.

Achte während der nächsten vier Schritte darauf, nur an den Kabelsteckern zu hebeln und nicht an deren Fassungen auf dem Logic Board.

Verwende die flache Seite eines Spudgers oder einen Fingernagel, um die Frontkamera und den Sensorenkabelstecker zu trennen.

Your contributions are licensed under the open source Creative Commons license.