Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

English
Spanish

Translating step 3

Step 3
Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board. Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.
  • Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.

  • Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.

  • Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.