Skip to main content
English
French

Translating step 1

Step 1
Locate the two speakers at the bottom of the device. Remove the two speakers by prying them out using a pair of tweezers.
  • Locate the two speakers at the bottom of the device.

  • Remove the two speakers by prying them out using a pair of tweezers.

  • Detach the red and black power wiring from the device and pull the speakers entirely out of the HP Stream 8.

  • Remember where the red and black wiring is connected to the device.

  • The power wires are soldered to the device and will be difficult to detach.

Retirez les deux haut-parleurs situés au bas de l'appareil à l'aide d'une pincette.

-[* black] Remove the two speakers at the bottom of the device using tweezers.
+[* black] Locate the two speakers at the bottom of the device.
+[* black] Remove the two speakers by prying them out using a pair of tweezers.
+[* black] Detach the red and black power wiring from the device and pull the speakers entirely out of the HP Stream 8.
+[* icon_reminder] Remember where the red and black wiring is connected to the device.
+[* icon_caution] The power wires are soldered to the device and will be difficult to detach.

Your contributions are licensed under the open source Creative Commons license.