Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
German

Translating step 1

Step 1
Remove the eight 8 mm T10 Torx screws securing the display to the outer case. The last two pictures are detail shots of each side of the display. The last two pictures are detail shots of each side of the display.
  • Remove the eight 8 mm T10 Torx screws securing the display to the outer case.

  • The last two pictures are detail shots of each side of the display.

Entferne die acht 8 mm Torx T10 Schrauben, die das Display am Gehäuse befestigen.

Die letzten beiden Bilder sind Detailansichten jeder Seite des Displays.

Your contributions are licensed under the open source Creative Commons license.