Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
Dutch

Translating step 6

Step 6
Disconnect the LCD thermal sensor cable connector from its socket on the logic board. If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable.
  • Disconnect the LCD thermal sensor cable connector from its socket on the logic board.

  • If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.