Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 28 guides that include this step.

English
Italian

Translating step 6

Step 6
Disconnect the LCD thermal sensor cable connector from its socket on the logic board. If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable.
  • Disconnect the LCD thermal sensor cable connector from its socket on the logic board.

  • If your fan is spinning full speed after completion, check this connection or the hard drive's thermal sensor cable.

Scollegare il connettore del cavo del sensore termico dell'LCD dal connettore femmina sulla scheda logica.

Se la ventola gira sempre alla massima velocità dopo il rimontaggio, controlla questa connessione o il cavo del sensore termico del disco rigido.

Your contributions are licensed under the open source Creative Commons license.