Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 26 guides that include this step.

English
Spanish

Translating step 6

Step 6
Turn the computer over and open the display.
  • Turn the computer over and open the display.

  • Remove the two 4.2 mm long, 1.5 mm hex screws at the top corners of the upper case (two total).

  • A T6 Torx driver will work, but repeated use will strip the screws.

Voltea la computadora y levanta la pantalla.

Saca los dos tornillos hexagonales de 1,5 mm, de 4,2 mm de largo, en las esquinas superiores de la caja superior.

Podrás usar un destornillador Torx T6, pero su uso reiterado estropeará los tornillos.

Your contributions are licensed under the open source Creative Commons license.