Skip to main content

Fix Your Stuff

Right to Repair

Store

English
Italian

Translating step 10

Step 10
Use the flat side of the soldering iron to apply heat to the shrink tubing until it tightens on the wire.
  • Use the flat side of the soldering iron to apply heat to the shrink tubing until it tightens on the wire.

  • Alternatively, you could also use a heat gun or hair dryer.

Utilizza il lato piatto del saldatore per applicare calore al tubo termoretraibile fino a quando non si stringe sul filo.

In alternativa, puoi anche usare una pistola termica o un asciugacapelli.

Your contributions are licensed under the open source Creative Commons license.