Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
French

Translating step 3

Step 3
Carefully, insert a plastic opening tool into the seam of the device and begin gently prying the two plastic pieces apart. Work the tool all the way around the device. Small plastic clips should release. If they do not, gently apply outwards pressure until the clips give. Do not force the clips open, as they are fairly easy to break
  • Carefully, insert a plastic opening tool into the seam of the device and begin gently prying the two plastic pieces apart.

  • Work the tool all the way around the device. Small plastic clips should release. If they do not, gently apply outwards pressure until the clips give.

  • Do not force the clips open, as they are fairly easy to break

Insérez délicatement un outil d’ouverture en plastique dans la couture de l’appareil et commencez à séparer doucement les deux pièces en plastique.

Travailler l'outil tout autour de l'appareil. Les petites agrafes en plastique devraient se dégager. Si ce n'est pas le cas, appliquez une légère pression vers l'extérieur jusqu'à ce que les clips donnent.

Ne forcez pas les clips pour les ouvrir car ils sont assez faciles à casser

Your contributions are licensed under the open source Creative Commons license.