Fix Your Stuff Community Store

Reemplazo del conjunto de placa base de la Nintendo 3DS

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Previous step Next step

Translating step 4

Back to Guide
English
Spanish
Step 4
Nintendo 3DS Motherboard Assembly Replacement: step 0, image 1 of 3 Nintendo 3DS Motherboard Assembly Replacement: step 0, image 2 of 3 Nintendo 3DS Motherboard Assembly Replacement: step 0, image 3 of 3

  • Remove seven Phillips screws securing the motherboard to the upper case:

  • Four 2.5 mm gold screws

  • Two 3.5 mm black screws

  • One 2.5 mm silver screw

  • When you remove this screw the volume slider can fall out.

  • Lift the side of the motherboard that sits along the bottom edge of the 3DS.

Retira los siete tornillos Phillips que sujetan la placa base a la carcasa superior:

Cuatro tornillos dorados de 2,5 mm

Dos tornillos negros de 3,5 mm

Un tornillo plateado de 2,5 mm.

Cuando quites este tornillo, el control deslizante de volumen puede caerse.

Levanta el lado de la placa base que se encuentra a lo largo del borde inferior de la 3DS.

Your contributions are licensed under the open source Creative Commons license.