Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 9 guides that include this step.

English
Japanese

Translating step 22

Step 22
Remove the logic board from the outer case, minding any cables that may get caught.
  • Remove the logic board from the outer case, minding any cables that may get caught.

  • When reinstalling the logic board, plug in a thunderbolt cable and a USB cable into the USB port closest to the headphone/microphone ports before tightening the logic board screws to ensure proper alignment.

ケーブルが絡まないように注意しながら、ロジックボードを外側のケースから取り外します。

ロジックボードを再装着するときは、ロジックボードのネジを正しい位置に合わせて締める前に、ヘッドフォン/マイクポートに最も近いUSBポートにThunderboltケーブルとUSBケーブルをプラグインします。

Your contributions are licensed under the open source Creative Commons license.