Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

English
German

Translating step 2

Step 2
Lift the heat sink thermal sensor connector straight up out of its socket on the logic board.
  • Lift the heat sink thermal sensor connector straight up out of its socket on the logic board.

  • Make sure to pull only on the connector and not the socket itself.

Hebe den Stecker des Thermosensors gerade aus seinem Anschluss auf dem Logic Board.

Achte darauf, dass du nur am Stecker ziehst, nicht am Anschluss.

Your contributions are licensed under the open source Creative Commons license.