Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 66 guides that include this step.

English
Spanish

Translating step 1

Step 1
For certain repairs (e.g. hard drive), disconnecting the battery connector is not necessary but it prevents any accidental shorting of electronics on the motherboard. If you do not disconnect the battery connector, please be careful as parts of the motherboard might be electrified. Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.
  • For certain repairs (e.g. hard drive), disconnecting the battery connector is not necessary but it prevents any accidental shorting of electronics on the motherboard. If you do not disconnect the battery connector, please be careful as parts of the motherboard might be electrified.

  • Use the edge of a spudger to pry the battery connector upwards from its socket on the logic board.

  • It is useful to pry upward on both short sides of the connector to "walk" it out of its socket.

Para ciertas reparaciones (ej.: disco duro (HDD)), desconectar el conector de batería no es necesario pero previene cualquier corto circuito de los electrónicos de la tarjeta madre. Si no desconectas el conector de la batería, se cuidadoso, las partes de la tarjeta madre pueden ser electrificadas.

Usa el borde del spudger para apalancar el conector de la batería hacia arriba del enchufe en la tarjeta lógica.

Es útil el apalancar hacia arriba en ambos lados de forma equitativa del conector para deslizarlo suavemente fuera de su enchufe.

Your contributions are licensed under the open source Creative Commons license.