Fix Your Stuff Community Store

Installation du lecteur optique du MacBook Pro 15" Unibody début 2011

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Previous step Next step

Translating step 4

Back to Guide
English
French
Step 4
MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: step 0, image 1 of 2 MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: step 0, image 2 of 2

  • Remove following two screws:

  • Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

  • One 8.6 mm Phillips screw

  • One 3.9 mm Phillips screw

  • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

Retirez les deux vis suivantes :

Soyez prudents ! La tête de ces vis est très fragile. Exercez une pression suffisante lorsque vous dévissez. Lisez les commentaires avant de procéder.

Une vis Phillips 8,6 mm.

Une vis Phillips 3,9 mm.

Avec précaution, faites pivoter la carte AirPort/Bluetooth (avec les câbles AirPort/d'antenne toujours connectés) hors du boîtier inférieur

[* black] Remove following two screws:
- [* icon_caution] Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments on the right before proceeding.
+ [* icon_caution] Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.
[* red] One 8.6 mm Phillips screw
[* orange] One 3.9 mm Phillips screw
[* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

Your contributions are licensed under the open source Creative Commons license.