Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

English
French

Translating step 15

Step 15
Carefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal. If necessary, use the flat end of a spudger to separate the microphone from the upper case. Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly.
  • Carefully lift the logic board assembly from its left side and work it out of the upper case, minding the optical drive cable and the I/O ports that may get caught during removal.

  • If necessary, use the flat end of a spudger to separate the microphone from the upper case.

  • Pull the I/O port side of the logic board away from the side of the upper case and remove the logic board assembly.

Saisissez l'ensemble carte mère du côté gauche et retirez-le soigneusement du boîtier supérieur en veillant à ce que la nappe du lecteur optique et les ports I/O ne restent pas accrochés.

Si nécessaire, séparez le microphone du boîtier supérieur avec l'extrémité plate d'une spatule.

Écartez le bord des ports I/O de la carte mère et le bord du boîtier supérieur, puis retirez l'ensemble carte mère.

Your contributions are licensed under the open source Creative Commons license.