Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Japanese

Translating step 2

Step 2
Remove the heat sink from the logic board.
  • Remove the heat sink from the logic board.

  • If the heat sink appears to be stuck to the logic board after removing all six screws, it may be helpful to use a spudger to separate the two components.

  • If you need to mount the heat sink back onto the logic board, we have a thermal paste guide that makes replacing the thermal compound easy.

基板からヒートシンクを取り出します。

6本のネジを取り出した後、基板にヒートシンクが付いたままの状態であれば、スパッジャーを使って両コンポーネントを引き離してください。

ヒートシンクを再び基板に取り付ける場合は、放熱グリスの塗布方法を参照してください。

Your contributions are licensed under the open source Creative Commons license.