Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.


Translating step 4

Step 4
  • 本体の前側のバッテリーの仕切りにある画像の赤丸で示した四つのネジを外してください。左から、2番目,4番目,7番目,9番目のネジです。

  • 長さ3.25mmのPhillips #000ネジ(ネジ頭:直径4mm,厚さ0.4mm)が四つ

Please remove the four screws indicated by the red circle of the image on the partition of the battery on the front side of the main unit. It is the 2nd, 4th, 7th, 9th screw from the left.

Four Phillips # 000 screws (screw head: 4 mm diameter, 0.4 mm thickness) with a length of 3.25 mm

Your contributions are licensed under the open source Creative Commons license.