Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.


Translating step 3

Step 3
  • バッテリーの右側の仕切りの両端にある下記の二つのネジを外してください。(バッテリーコネクタに近い方のネジはバッテリーコネクタを固定しているだけなので外す必要はありません。)

  • 長さ6.25mmのPhillips #000ネジ(ネジ頭:直径4mm,厚さ0.5mm)が二つ

Please remove the following two screws at both ends of the partition on the right side of the battery. (The screw closer to the battery connector is only fixing the battery connector, so it is not necessary to remove it.)

Two Phillips # 000 screws (screw head: diameter 4 mm, thickness 0.5 mm) with a length of 6.25 mm are two

Your contributions are licensed under the open source Creative Commons license.