Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.


Translating step 2

Step 2
  • バッテリーとの仕切りの後に付いている下記の三つのネジを外してください。

  • 長さ3mmのPhillips #0ネジ(ネジ頭:直径2.75mm)が一つ

  • 両端に長さ4mm Phillips #0のネジ(ネジ頭:直径2.75mm)が二つ

Take out the battery and the 3 screws inside the battery compartment.

One 3mm long phillips head #0 screw (Screw diameter: 2.75mm)

On either side there are two 4mm long Phillips head #0 screws. (Screw head diameter is 2.27mm)

Your contributions are licensed under the open source Creative Commons license.