Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Japanese
English

Translating step 5

Step 5
コンピューターの後側にある下記の四つのネジを外してください:
  • コンピューターの後側にある下記の四つのネジを外してください:

  • 長いネジは内側、短いネジは外側両端になります。

  • 長い11mmのシャンク付きPhillips #00ネジ(シャンクの寸法:直径2.2mm,長さ2mm)(ネジ頭:直径3.2mm,厚さ0.5mm)が二つ

  • 長さ7.25mmのシャンク付きPhillips #00ネジ(シャンクの寸法:直径2mm,長さ3.75mm)(ネジ頭:直径3.2mm,厚さ0.5mm)が二つ

Please remove the following four screws on the back side of the computer:

The long screws are inside and the short screws are outside both ends.

There are two Phillips # 00 screws (shank dimension: 2.2 mm in diameter, 2 mm in length) (screw head: 3.2 mm in diameter, 0.5 mm in thickness) with a long 11 mm shank

There are two Phillips # 00 screws (shank dimension: 2 mm in diameter, 3.75 mm in length) (screw head: 3.2 mm in diameter, 0.5 mm in thickness) with a shank of 7.25 mm in length

Your contributions are licensed under the open source Creative Commons license.