Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Japanese

Translating step 22

Step 22
Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel.
  • Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel.

  • Be careful not to damage any of the headphone jack parts while shaping these clips!

メタルスパジャーの平面側先端を使って、リアパネルから細いメタルレールを裂かないように注意しながら、クリップを押し下げます。

ヘッドホンジャックを破損しないように注意しながら、クリップを整形します。

Your contributions are licensed under the open source Creative Commons license.