Skip to main content
English
Italian

Translating step 4

Step 4
Lift the end of the AirPort board up enough to pass over the heat sink directly behind it. Do not lift the AirPort board too high, or you could damage the contacts or socket. Pull the AirPort board straight out of its socket on the logic board.
  • Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.

  • Do not lift the AirPort board too high, or you could damage the contacts or socket.

  • Pull the AirPort board straight out of its socket on the logic board.

  • There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.