Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Italian

Translating step 22

Step 22
Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel. Alternatively a pair of flat pin nosed pliers can be used to reduce risk of slipping and damaging the headphone jack.
  • Take the broad, flat side of the metal spudger and push the clip down, taking care not to tear the thin metal rail from the rear panel. Alternatively a pair of flat pin nosed pliers can be used to reduce risk of slipping and damaging the headphone jack.

  • Be careful not to damage any of the headphone jack parts while shaping these clips!

Usando l'estremità piatta di uno spudger di metallo spingi la clip in basso, facendo attenzione a non strappare il sottile binario di metallo dal pannello posteriore. Come alternativa puoi utilizzare un paio di pinze a punta piatta per ridurre il rischio di scivolare e quindi danneggiare il jack cuffie.

Fai attenzione a non danneggiare nessuna parte del jack per cuffie quando cambi la forma a queste clip!

Your contributions are licensed under the open source Creative Commons license.