Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Spanish

Translating step 18

Step 18
Use a spudger to lift the retaining flap holding the connector cable.
  • Use a spudger to lift the retaining flap holding the connector cable.

  • The retaining flap only needs to lift up 2 mm. This is a sensitive connector and too much force can remove it from the logic board.

  • Slide the orange battery ribbon out of its connector.

Usa el Spudger para levantar la solapa que mantiene en su sitio al cable conector.

Esta solapa solo necesita levantarse unos 2 mm. Es un conector sensible, y si haces mucha fuerza podrías separarlo de su placa lógica.

Desliza el cable plano naranja de la batería fuera de su conector.

Your contributions are licensed under the open source Creative Commons license.