Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

English
Spanish

Translating step 10

Step 10
On the other side, insert an opening tool into the seam between the front and back of the iPod.
  • On the other side, insert an opening tool into the seam between the front and back of the iPod.

  • You may find it easier to angle the opening tool stuck in the top corner in order to create a sufficient gap.

Repite la operación de introducción de una herramienta de apertura, esta vez en el otro lado de la misma esquina del iPod (tal y como muestra la imagen).

Te resultará más fácil si le das un pequeño ángulo a la herramienta de apertura de la otra parte de la esquina, generando así un hueco suficiente.

Your contributions are licensed under the open source Creative Commons license.