Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 4

Step 4
Remove the EMI shield. When installing the EMI shield, orient it so that the metal cutout (shown at bottom center) lays over the top of the display cable assembly, while the piece of tape slides behind it.
  • Remove the EMI shield.

  • When installing the EMI shield, orient it so that the metal cutout (shown at bottom center) lays over the top of the display cable assembly, while the piece of tape slides behind it.

EMIシールドを取り出します。

EMIシールドを再装着する際は正しい位置に合わせるため、メタル製のカットアウト(画像デバイス下部の中央)がディスプレイケーブルアセンブリ上部に重なるように装着して、テープはアセンブリの裏側に差し込みます。

Your contributions are licensed under the open source Creative Commons license.