Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
Italian

Translating step 3

Step 3
Use the point of a spudger to flip up the locking mechanism on the I/O board connector. Flip the spudger around and use the flat end to slide the I/O cable out of the connector. Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.
  • Use the point of a spudger to flip up the locking mechanism on the I/O board connector.

  • Flip the spudger around and use the flat end to slide the I/O cable out of the connector.

  • Push on the opened locking mechanism for an easy way to slide the I/O cable out of the connector. This could help prevent accidental damage to the cable or connector contacts.

Usa la punta di uno spudger per sbloccare il meccanismo di fissaggio del connettore della scheda I/O.

Gira lo spudger e usa l'estremità piatta per far scorrere il cavo I/O fuori dalla sua sede.

Spingere sul meccanismo aperto di sblocco è un modo semplice per far scivolare fuori dal suo connettore il cavo I/O. In questo modo si evitano danni accidentale il cavo o i contatti del connettore.

Your contributions are licensed under the open source Creative Commons license.